I have got a question for all the #tech people out there with experience regarding #hp and #Linux
#Windows11 is being rolled out and I probably will have to set up my Laptop again. Never used #Linux on a PC, so how about:
Do #Linux distributions support HP omen 17 (2019) ?
If so, which one would you recommend for chiefly MS Office use (64-bit Excel a must) ?
How difficult is a set-up for a non-IT pro who has always worked with Windows (but installed systems)?
@amunizp
Once you realize, that you need to select the #Etcher version for the host system, not the target #OS you want to install, it is all great. - Already at 20% of #Ubuntu on the #USB stick.
@Linux4Everyone @linux
@amunizp
Ok. The installation on the stick is completed.
I put the stick in the target system (HP) and did not mess with any further settings, but pressed Try Ubuntu (first option).
Then, I selected the colorful (:)) option “Try Ubuntu” (without installation)
@Linux4Everyone @linux
@amunizp
The system did start and looks sort of like a windows 1.0 desktop, but in white on bright yellow, almost unreadable.
Thoughts?
@Linux4Everyone @linux
@amunizp
Was able to power down the system using the #ApplicationLauncherSearch, but the color settings need to be fixed.
https://vitux.com/3-ways-to-shut-down-power-off-your-ubuntu-system/
Does this have to be done via BIOS settings before booting? Once the system starts, I can hardly see a thing, got lucky with the launcher.
@Linux4Everyone @linux
@amunizp @Linux4Everyone @linux
Too bad, as I was thinking, #BIOS errors with the #Ubuntu #Linux #bootstick.
Any 💡 ideas which settings would need to be changed?
@HistoPol
https://www.infofuge.com/hp-omen-17-ubuntu/
Not an HP owner or user. So Googled, and it seems the process is straightforward.
#linuxmint builds on #ubuntu, and is a leading install and forget distribution which is also a good starting point for newcomers.
That said, not clear on how you got the BIOS errors. Could you walkthrough to it please?
@amunizp @Linux4Everyone @linux
@vipaal
Not sure if I understood everything. I created the USB bootstick with the latest 5yr “warranty” versión.
Then, I reebooted and selected the 1st option: start or install.
I then selected boot from USB.
Then I got the BIOS Error screen for some second.
After that, the yellow screen from the UEL below, but with white instead of green.
Note: I’ve never seen a working #Linux desktop.
@amunizp @Linux4Everyone @linux
@HistoPol
Ubuntu is asking to enable sgx, which can be done as explained in the answers here https://askubuntu.com/questions/1406760/sgx-disabled-by-bios-in-ubuntu-22-04
Enter BIOS, go to security section, set the Intel software guard extension option to enabled – from the top voted answer
The accepted answer explains a workaround. The catch being that watching 4K Blu-ray will be impossible.
@amunizp @Linux4Everyone @linux
@vipaal
(1/2)
Sooo…,
I have succeeded in using your "SGX to “enable” pretty quickly.
Still, same errors and the yellow UBUNTU.
I then saw that there is another boot option with “safe graphics”, which I used. And (partial) “bingo”: I finally got a boot, but still the same disturbing BIOS errors.
The System then booted in a “safe mode” with 1024x768 resolution.
I found where I could (theoretically) change this, but as it is “safe mode”–…
@amunizp @Linux4Everyone @linux