• TropicalDingdong@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    1
    ·
    9 months ago

    I think the mirror should be a standard one from the Ivanpah Solar power facility. Wikipedia puts them at 7 meters in area. Wikipedia also puts it at 7.4 kWh/m2/day. I think those would be acceptable parameters for you? I think this fits in with the spirit of the bet because these would be the specific parameters taken from the mirrors mentioned in the meme.

    Do you have any suggestions for me on parameters to constrain my shopping on Amazon for laser parameters? I said a laser I could purchase on Amazon, so I’m ok with sticking with them as a source. I can buy some pretty damn beefy lasers off Amazon. For example, I can buy a 2000 watt laser on prime right now. Do you want constraints here?

    Also, $1000 is out of my price range. I can afford to lose $100. Are you ok with that?

    • mozz@mbin.grits.dev
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      9 months ago

      Well but the actual mirrors would not work at all because of any number of reasons (among other reasons they can’t track fast enough or precisely enough to actually hit a satellite, and they’re going to have little imperfections in their flatness which will distort the reflected beam away from what the laws of optics say would happen for an idealized situation). The whole actually-shooting-down-satellites thing is clearly a joke; my point was more disagreeing with your description of how the laws work in the idealized situation.

      Hmm… I am confident that optically, an idealized flat mirror will reflect a patch of sunbeam that’s more collimated than any human-produced laser at any price. I’m less sure about the actual Ivanpah mirrors but I would guess that they are flat enough to produce a beam that’s more collimated than a standard consumer laser. The thing is that that’s more or less impossible to test… we can ask a physicist about the physical laws, but my guess is that they would be as clueless as I am about how precisely flat the mirrors actually are and of course there’s a lot of wiggle room in how fancy a laser we want to say you can get.

      We could ask one of those Youtubers like the ones I linked to if they want to fly a helicopter into the beam from one mirror at a great distance and do measurements of how much the beam had attenuated in practice, but that seems like a great setup to a “what could go wrong” disaster video in the making…

        • mozz@mbin.grits.dev
          link
          fedilink
          arrow-up
          3
          ·
          9 months ago

          I will bet $1,000 (or $100) that this is wrong:

          Lets assume each of the mirrors reflects 850 watts. The distance to the ISS is 408,000 meters.

          The energy reflected by one mirror as received by the ISS is subject to the inverse square law (because it is incoherent).

          E = (850 watts) / (4pi408000m)2,, or about 4.06x10 −10 watts/m2

          A 5 milliwatt, off the shelf laser pointer with a beam divergence of 1.5 millirads would deliver approximately 4.25x10-9 watts/m2, or about 10x as much energy as the 850 watt mirror.

          You can not melt a spy satellite with mirrors. You might be able to with lasers. A laser will be approximately 8.9x106 times as power effecient at getting light from earth to the ISS as a mirror would be.

          And this is right:

          E = 850 watts / 149,597,971 km^2 * 149,597,871 km^2 = 849.998864 watts

          I will also bet on the behavior of an idealized flat mirror. I won’t bet on whether you can actually shoot down satellites with the Ivanpah solar plant, because there are real-engineering issues that interfere with it aside from the physics of how mirrors and sunlight work.

          If you want to try to chart a middle ground, I think it’d be better to talk about something actually testable than trying to argue about the real-world behavior of the Ivanpah mirrors. I’d be happy to bet $100 that:

          Take a mirror and find the sun. Send a reflection to the wall nearest you. Then send the reflection to a wall further away. The reflection on the wall further away is larger and therefore, the energy more spread out.

          … is wrong, as long as the mirror is flat. This one is easy to test so this might be a better bet.

            • mozz@mbin.grits.dev
              link
              fedilink
              arrow-up
              4
              ·
              9 months ago

              I care so much that I was outside earlier today, messing with my little reflective discs. It’s actually really hard to get the angles right and I couldn’t find a wall that was at the right type of angle to be able to test it without the reflection skewing from where the sun was, and a couple of people came near me, and clearly looked at me sort of wondering “what the hell is this guy doing.”

              I made no attempt to explain. Y’all can think I’m insane or whatever. I’m doing science. Get the fuck away.

          • TropicalDingdong@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            2
            ·
            edit-2
            5 months ago

            … is wrong, as long as the mirror is flat. This one is easy to test so this might be a better bet.

            But that was never the bet. The bet was about transmitting light through the atmosphere. This is just some weird little aside you got yourself tangled in. More than happy to take on a bet about the transmission power of mirrors versus lasers from space, which is what were actually discussing.

            (Dug this one out of the grave because I’m trying to find another bet I just won, so was searching for “bet”)