Hello. A few days ago I tried to remove the rim to change out the tires. What happened, I tried to loosen the bolt that’s holding the rim down and the head of the socket broke, leaving behind a piece wedged between the rim and bolt. It’s very much stuck in place. Tried to hammer the piece with no result. I want to remove it with any cost. It’s hard to see in the photo, but you get what I’m talking about
You must log in or register to comment.
Vice grips then hit it with a hammer or add heat that hit it or use extractor to get nut started out
I would use a pin punch to rock it side to side and it should eventually loosen enough that a magnet retriever should be able to pick it out.