2009 Camry, I had a cylinder 2 misfire. I changed all the plugs and I swapped cyl2 and cyl4’s ignition coil. Reset the system and ran the car. The cyl2 misfire came back. What should I try next, wires?
You must log in or register to comment.
Next would be to verify the injector is firing properly and that you have good compression.
Check the coil harness & connector.
If you moved the coil, you don’t have wires. You have coil on plugs. The next step is to do a compression test on that cylinder. The possible culprits at this point are a bad fuel injector, or a cylinder / compression issue. I would suspect the injector first