The original post: /r/overclocking by /u/Round_Display_6107 on 2025-02-22 05:59:10.

I have slaved away at this for days on end. Nothing works. This is a hail mary throw, last ditch effort. If anyone knows how to do this, knows any compatibility issues, or knows any previous errors, PLEASE share.

I own an ASUS Prime B450M-A II motherboard, micro-ATX form factor. I also own 4 sticks of Corsair Vengeance RGB Pro RAM at 3200mhz. I have been running that RAM at 2133mhz speed for the past three years, and I have been aware of that.

Over the past week or so, I have edited specific voltages, timings, more detailed settings that require endless reading through forums etc. etc. etc. and I cannot get this RAM to boot normally at the speed of 3200mhz.

Yes, I know this motherboard is Dual Channel. Yes, I know that two sticks is optimal on a motherboard of this kind. Yes, I know I should have asked this sub earlier. No, I don’t know much more specifics about OC details.

Here’s a timeline of events:

About a week ago - enabled DOCP profile with RAM set to 3200mhz, booted in POST. Reset to default.

Day after failed DOCP enabling - Edited voltages and timings to what I thought was correct based on forums and YT videos I researched. Failed miserably at booting. Tried booting with two RAM sticks, one RAM stick, no RAM sticks, clearing CMOS, but couldn’t get it to show anything on screen. Ended up disassembling the entire thing and reassembling (also a dust clean). Booted normally after that.

*two day break*

3 days ago - tried enabling same DOCP profile again, same thing. Booted in POST and I reset to default.

2 days ago - Retried voltage editing with a new more informational forum I found. Turned out to be on an old BIOS update, so booted in POST again and reset to default again.

Yesterday - No attempts, just researched and tried to see if I could find any information of use.

Today - tried one more time enabling DOCP profile, no luck. POST and reset defaults.

I am more than happy for anyone’s help. I trust there is someone out there with enough knowledge to help me here, and all I can do now is pray that person will come. Please, man. I just want 3200mhz RAM.

Thanks in advance.