Wanted to share this since this was a long Project. Since Autodesk started changing Fusions functionality, from limiting active projects, to changing their terms of service. Since I need a CAD tool for my 3D Printable designs, I started migrating to a new cross platform CAD tool. That happened to be FreeCAD.

Learning FreeCAD wasn’t easy, but was well worth my time. And after slowly pecking at it for 11 months, I was able to re-build every design I made (that I cared about).

I’ve made my 3D Printable designs available on my GitHub if you are interested: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns

  • TheEighthDoctor@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    11 months ago

    I’m barely able to design in Fusion I’m afraid I would be overwhelmed with free cad, on the other hand, I didn’t invest that much time in F360 so it’s less of a waste if I change.

    • king_link1@feddit.dk
      link
      fedilink
      English
      arrow-up
      2
      ·
      11 months ago

      I started sorg freecad and yes, i have had my struggles with it but i havent felt like i missed out. My advice is to give it a go