Wanted to share this since this was a long Project. Since Autodesk started changing Fusions functionality, from limiting active projects, to changing their terms of service. Since I need a CAD tool for my 3D Printable designs, I started migrating to a new cross platform CAD tool. That happened to be FreeCAD.

Learning FreeCAD wasn’t easy, but was well worth my time. And after slowly pecking at it for 11 months, I was able to re-build every design I made (that I cared about).

I’ve made my 3D Printable designs available on my GitHub if you are interested: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns

  • 👍Maximum Derek👍@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    2
    ·
    11 months ago

    A few projects, but not enough to learn all the differences. And not enough to change my mindset toward sketches. I usually draw compound sketches that aren’t valid in FreeCAD and I tend to realize that too late. CAD is kind of a zone-out hobby for me, my brain often isn’t fully engaged.