Here is the other side: https://imgur.com/a/DQQooDk

Gushing about CoreXY:

I finally got around to upgrading to a klipper based core xy machine and it is magic I went for the K1 Max, since it was $680 after discounts and it’s 300mm3 (1.5X the size of a X1C)

Accelerations are 10x faster, print times are 4x shorter compared to my highly modded ender3 and cr-10. this build took about 12hr of print time, normally it was 2 full days.

NO sanding, NO filing, NO heating things up to make them fit right.

Every single piece came off the build-plate perfectly ready to go, aside from my intentionally under-sized pivot and takedown pin holes. I like to drill those out personally…

Now for the specifications:

  • Daichi Upper + shroud (modified)
  • DS1913 Lower v1.2 (modified)
  • Slim Everytown mag (modified)
  • Get Bent angled grip
  • Mini hand stop
  • sling mount is just the mount from SG22 brace
  • Sling is a laptop bag strap 😆
  • The muzzle device is an AKM compensator I modified to work for AR barrels. It works marvelously to prevent muzzle climb. Check the video how the gas is going up and forward.
  • The binary is the mythical Invisibinary by Klaviermeister. It was taken down years ago but if you have half a brain you can find it still. Fosscad of reddit keeps making posts begging for the files every few months lol. they all give up and pay $400 for a storebought binary.

Wondering about reliability? I have thousands of rounds through this binary trigger. check out this clip of a mag dump at 600RPM: https://imgur.com/a/khxhymP

this firearm is for self-defense only. The quote is from Woody Guthrie's guitar ___

  • 4lan@lemmy.worldOP
    5·
    11 months ago

    yeah I got banned on my main acct for advocating for the use of the death penalty as punishment for treason. Funny because that’s literally in the law books but whatever lol.

    Invisibinary is by Klaviermeister, in the **Invisiboogle **package. Internet archive is your friend ;) it comes with 3 position selectors (as you can see in the pic). Safe, Semi, Binary

    You can print a trigger, but I bought the metal milspec burst trigger for $20 which makes it way more reliable. (this is all covered in the documentation)

    disconnector is in the files, printed, I like it a lot and it has never failed me.

    I suggest combining the trip arm and trip nub into one piece. I did this in Fusion but you might be able to align them in your slicer, no guarantee. The trip nub is what prevents the disconnector from tilting back into it’s original position, thus firing the gun on the release. Semi works perfectly fine, always resets when released.

    For the trip nub I anneal it with a lighter very slowly. Heat, cool, heat cool until it is shiny with no layer lines. this is a delicate dance and you’ll probably ruin the first one so print a few. Well worth it and makes it last pretty much indefinitely.

    I use eSun PLA+ for everything,

    let me know if you have any questions. You can PM me if you end up trying it and have trouble