Plugged in my formatted USB C drive and nothing happens.
Is there anything special I need to do for SD to recognize the USB C drive. It is a simple stick drive, no other power source required.
You must log in or register to comment.
The same thing happened to my USB C drive. It doesn’t get read when it’s plugged directly to the USB C port of the deck. Made it readable by using the official dock and plugging the thumb drive with a USB A adapter to one of the dock’s ports.
This is a known issue with the USB port on the OLED deck.
There is a workaround for this issue where you can boot into the bios, and in the Advanced>USB Configuration screen, change the USB Dual Role Device setting from DRD to XHCI. If you’re unfamiliar with entering the bios, shut down your deck, hold the Volume+ button and then turn on the deck. You can release the Volume button after you hear the beep
Video walking you through the process: https://youtu.be/guoen-rRMo8
Thanks for this. Time to place back my USB A adapter to the vault. 😆
For some reason my USB C is only detected right after restarting the deck. Otherwise if I plug it in, it’s not detected.