Hi

I am wondering if there anything can automate opening and shutting down water through angle valve?

  • its_me1001@alien.topOPBEnglish
    1·
    1 year ago

    Thanks for sharing! Proportional flow control is ideal! It will be great to share some links of the tools/parts that would help me to start this project

    • UnorthodoxEng@alien.top
      BEnglish
      1·
      1 year ago

      I did it by measuring the torque required to turn the valve (using a spring balance on the end of a lever which operated the valve.

      Then bought a servo which had about double that torque rating - just so it has some in the bag if needed & won’t be over-stressed long term.

      I fabricated a bracket for mine - but this could more easily be 3D Printed.

      Then used an ESP32 (Arduino kind of thing) to control the servo.

      Unfortunately, I have no links or guides for you to follow - you’ll have to figure it out as you go.