An electrician ‘fixed’ an issue by making this hole in a basement cinder block wall.

… how do I put that box back in or fix the wall or something?

Inside the box are two capped (hot) wires.

The pipe seems to be copper. Doesn’t bend or anything. It can’t (at least easily) be pushed back in.

I had wanted to use cement paste… but like what do I do about the box? I guess I could paste everything except the metal pipe but geez: then i still have this sketchy box hanging out.

Images: https://imgur.io/a/yBh2QBD (posted from mobile and don’t think the images went through)

Any ideas?

  • pdavis@lemmy.world
    2·
    1 year ago

    Electrically speaking it is in the proper housing, but the box is not secured, so I would ding it for that at the very least. I agree about cutting the conduit back and putting in a proper secure box and then cementing around the box. You could also use a surface mount box. In that case you would cut the existing conduit back, put a 90 degree elbow with a enough conduit to extend past the wall edge. Patch the wall and then install a surface mount box where the wires are connected in.