EV Charger Plug fire - be careful! (Input requested. Link to pics below).

Dodged a full house fire last night. Outlet completely melted. Fire burned casing and wall, but went out on its own.

Equipment:

  • Siemens versicharge 240/30A plugged into a NEMA 6-50 in a drive under garage.
  • Dedicated line with 40A fuse
  • Professionally installed during home construction.

Events:

  • Charged friends MS 100D for 8 hrs during the day
  • Charger rested for 1.5 hrs
  • Plugged in a MS 75 to top off for the evening
  • MS charged for a few hours then breaker tripped

Next morning I go out to find this near catastrophe.

Very scary. Melted box, all wood is charred.

Curious if I need to replace the entire wire (which is run through about 50 feet of walls in my house).

I read that EV chargers should be hardwired to avoid fault points like a plug.

Also read that most NEMA plugs aren’t intended to handle current for long periods of time (designed for a few hours running a dryer).

Electricians coming tomorrow.

Welcome any comments about how to protect myself in the repair/ reinstallation.

I’m likely going to hardwire the charger (no plug) and look into adding a temperature sensor or something - and definitely a fire sensor.

Link to pictures of failed plug: https://imgur.com/gallery/2joUiOp

  • F_P_G_A@alien.top
    cake
    B
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Yeah - I also thought that looked like a melted wire nut. Seems like a REALLY BAD way to install EVSE!